Containment answers one question: where else are the bad parts, and who could still use one. It has nothing to do with the cause, it needs no analysis, and it is the part of a complaint that your customer judges you on. Six steps, three days.
The case
Complaint CPL-2026-012 arrived on a Thursday morning. Customer C-07 had found 36 parts of a delivery of 1,200 with the mounting bore 0.8 mm out of position, and the assembly line had stood for two hours. The case was classed S2, so containment was due on the next working day and the answer on working day ten.
Tracing the delivery back to the lot and forward again gave three lots with 4,200 parts: 1,200 at the customer, 1,800 in finished goods, 1,200 already built into machines.
Six steps
- Find the lots. From the complained delivery back to the lot, and from the lot forward to every delivery it went into. How far back you can trace decides how much you have to sort.
- Locate the quantity. Customer, in transit, finished goods, work in process, subcontractor, service stock. One line per location, none left empty.
- Block and mark. Separate in the rack and in the system on the same day, with a label nobody can misread. Agree who may block: quality blocks on suspicion, the release needs a signature.
- Sort to an instruction. One page: the characteristic, the gauge or boundary sample, the limits, how good and bad parts are marked, and where the result goes.
- Replace or credit. One agreed way with one date, planned into production, not promised on the phone.
- Confirm in writing. What is protected, what is still open, when the next word comes.
What the sorting showed
| Location | Quantity | Checked | Bad |
|---|---|---|---|
| At the customer | 1,200 | 1,200 | 66 |
| Finished goods | 1,800 | 1,800 | 54 |
| Already built in | 1,200 | Checked at final test | 0 |
| Total | 4,200 | 3,000 | 120 |
Two people sorted at the customer for a day, the plant sorted its own stock with a pin gauge in twelve hours. A replacement delivery of 66 parts left the next day. Containment was confirmed in writing on day three, and the cause was still unknown at that point. That is the right order.
Sorting that counts
A sort without a recorded result has to be done again. Every sorted quantity gets a line: how many checked, how many bad, by whom and when. Good parts get a marking that is unique to this sort, so that a second sort of the same pallet is visible and avoidable, and so that the customer can see at the gate which boxes are released.
Sorting is also the biggest single cost block in this plant, 28 percent of the complaint cost of the year. That is a reason to make it fast and accurate, and a reason to count the hours while the case runs instead of estimating them later.
What makes containment slow
| Reason | What fixes it |
|---|---|
| The lot of the delivery cannot be found | Keep lot and delivery note linked, and decide which record is the source |
| Nobody may block stock without the plant manager | A written blocking rule with one signature for the release |
| Sorting starts without an instruction | A one-page instruction written by the person who knows the fault |
| Parts at the customer are forgotten | A containment list with a line per location, including transit and subcontractors |
In the baseline year the plant needed 6.0 working days to confirm containment. After twelve months it needed 2.0. Nothing in that change was technical. It was a traceability record that holds, a blocking rule and a template for the sorting instruction.