Skip to content
Digital Shop Floor | Part 8 of 10

Traceability: From Complaint to Affected Parts in Minutes

Order, batch or serial number: choose the level by risk, record at five points, and test the chain every quarter.

A customer reports a defect. Which other deliveries contain parts from the same material lot? With paper records the answer takes days, and the safe choice is often to block far more than necessary.

Traceability turns that question into a search of minutes.

Choose the level

There are three levels, each with more effort and more precision:

  • Order level: customer order, production order, date and line are linked. Basic proof of what was delivered when.
  • Batch level: supplier lots of material are linked to production batches. A recall can be limited to the affected batches.
  • Part level: each serial number is linked to process data and test results. Used for safety parts and high value products.

Choose the level by risk and customer requirements, not by what the software can do. Every scan that nobody uses later is effort without value.

Record at five points

For batch traceability, five recording points are usually enough:

  1. Goods receipt: supplier, supplier lot and quantity, by label scan.
  2. Material issue to the line: supplier lot to production order, scanned at the supermarket.
  3. Process step: order, machine, time and key parameters, automatically from the machine.
  4. Test station: result per batch or serial number, automatically from the test file.
  5. Packing and shipping: batch or serial number to delivery note, by label scan.

The link in the middle is the weak point. If material is moved between orders without a scan, the chain breaks. Make the correct way the easy way: scanners where the material is picked, not in an office.

Test the chain

Once per quarter, pick a supplier lot and find all affected customer deliveries. Measure the time and write down every gap.

In one plant the first test took two days, searching through paper forms and spreadsheets. After batch traceability in assembly the same test took eleven minutes.

Traceability supports improvement

The same records help beyond recalls. Linking defects to batches and machines shows patterns: a supplier lot with more scrap, a machine whose parameters drift before failures, a shift with more rework. Traceability data used only for audits is a cost. Used in problem solving, it pays back.

Start small

Start in the area with the highest risk or the strictest customer, prove the chain with a recall test, and roll out the same five recording points to the next area. A plant-wide project that tries to trace everything at part level from day one rarely reaches the shop floor.

Newsletter

One Lean idea.
Every week.