DPMO and Sigma Level Calculator
Defects per million opportunities and the sigma level that goes with it, to compare processes of different complexity.
Enter your figures and select Calculate. The fields are prefilled with a worked example.
How to read it
How it was calculated
Please confirm your newsletter subscription via the link in your inbox.
The formula
Use this calculator when you count defects and want one comparable figure across products or processes with different complexity.
DPMO = Defects / (Units × Opportunities per unit) × 1,000,000
Sigma level = z value of (1 - DPMO / 1,000,000) + 1.5
Worked example
Inputs
- Defects found: 38 defects
- Units inspected: 1,500 units
- Defect opportunities per unit: 5 opportunities
Calculation
- Opportunities = 1,500 units × 5 = 7,500
- DPMO = 38 / 7,500 × 1,000,000 = 5,066.7
- Yield per opportunity = 1 - 0.005067 = 99.493%
- Sigma level = z value of 0.994933 + 1.5 = 2.57 + 1.5 = 4.07
Result
DPMO: 5,067 defects per million opportunities. The process runs at 4.07 sigma. For orientation: 3 sigma corresponds to 66,807 defects per million opportunities, 4 sigma to 6,210, 5 sigma to 233 and 6 sigma to 3.4. Between 3 and 4.5 sigma, most improvement comes from removing the few dominant causes one by one.
How to read the result
- The result depends on how many opportunities you count. Inflating the opportunities makes any process look good, so fix the definition once and keep it.
- The sigma level here includes the conventional shift of 1.5 sigma between short-term and long-term performance, as in most Six Sigma tables.
- DPMO counts defects, not defective units. One unit can carry several defects, so DPMO and the share of defective units are different figures.
- Process Capability Cp and Cpk
How well a stable process fits into its tolerance: Cp for the spread, Cpk for spread and centering together.
- First Pass Yield and Rolled Throughput Yield
The share of units that are right the first time at one step, and the share that passes a whole chain of steps without any defect.