First Pass Yield and Rolled Throughput Yield Calculator
The share of units that are right the first time at one step, and the share that passes a whole chain of steps without any defect.
Enter your figures and select Calculate. The fields are prefilled with a worked example.
How to read it
How it was calculated
Please confirm your newsletter subscription via the link in your inbox.
The formula
Use this calculator when final inspection looks fine, but you suspect rework and repair along the way.
FPY = Units good the first time / Units entering the process
RTY = FPY step 1 × FPY step 2 × ... × FPY step n
Worked example
Inputs
- Units entering step 1: 500 units
- Units good the first time at step 1: 480 units
- First pass yield of step 2: 98%
- First pass yield of step 3: 94%
- First pass yield of step 4: 99%
Calculation
- FPY step 1 = 480 / 500 = 96%
- RTY = 96% × 98% × 94% × 99% = 87.55%
- Units without any defect = 500 × 87.55% = 438
Result
Rolled throughput yield: 87.55%. Only 87.6 percent of the units pass all steps right the first time, although every single step looks acceptable. 12.4 percent need scrap, rework or repair somewhere: that is the hidden factory. Step 3 has the lowest yield at 94 percent and is the place to start.
How to read the result
- Count a unit as good only if it passes without any rework. A yield measured after rework hides exactly the effort you want to see.
- The rolled yield falls quickly with the number of steps: ten steps at 99 percent each give only about 90 percent overall.
- Improve the step with the lowest first pass yield first, and the earliest one when two are equal. Defects found late have already consumed the work of all later steps.