Skip to content
Series | 6 parts

Equipment Specification and Acceptance

Buy machines and lines that reach their output on the planned date. 6 parts in three blocks, from the need and the user requirement specification to quotation comparison with life cycle cost, design review, factory acceptance, site acceptance and handover.

Most problems with new equipment are not built by the supplier. They are ordered by the buyer: with a thin specification, a comparison by price and an acceptance that is a demonstration. This series follows one worked example, an assembly and test cell for 432,000 valve units per year with a specified cycle time of 25.0 seconds and an order value of EUR 1,180,000, through the whole sequence: how the need becomes four performance data, how 64 requirements are written so that each one can be tested, how three quotations are compared with a technical score and the cost over eight years, what a design review must find before parts are ordered, how the factory acceptance test and the site acceptance test are run, and how a performance run of ten shifts, the open points list and the handover close the project. It covers the equipment itself and complements the series on Launch Management, Maintenance Management, Supplier Management and Project Management. It names contract, warranty and safety questions as checkpoints and is not legal advice.

6 parts

Newsletter

One Lean idea.
Every two weeks.