Economic Order Quantity (EOQ) Calculator
The order or lot quantity at which ordering cost and holding cost together are lowest.
Enter your figures and select Calculate. The fields are prefilled with a worked example.
How to read it
How it was calculated
Please confirm your newsletter subscription via the link in your inbox.
The formula
Use this calculator when you need a first value for an order or lot quantity and know the cost per order and the cost of holding stock.
EOQ = Square root of (2 × Annual demand × Cost per order / Holding cost per unit and year)
Holding cost per unit and year = Unit cost × Carrying cost rate
Worked example
Inputs
- Annual demand: 12,000 units
- Cost per order or setup: 80 EUR
- Unit cost: 15 EUR
- Carrying cost rate per year: 20%
Calculation
- Holding cost per unit and year = EUR 15 × 20% = EUR 3
- EOQ = square root of (2 × 12,000 × EUR 80 / EUR 3) = 800 units
- Orders per year = 12,000 / 800 = 15, one every 24.3 days
- Ordering cost = 15 × EUR 80 = EUR 1,200 per year
- Holding cost = 800 / 2 × EUR 3 = EUR 1,200 per year
Result
Economic order quantity: 800 units. At 800 units per order, ordering and holding cost are equal and their sum of EUR 2,400 per year is at its minimum. The curve is flat around this point: a quantity 20 percent higher or lower raises the total cost by only about 2 percent, so round to full containers, pallets or supplier pack sizes without worry.
How to read the result
- The formula assumes steady demand and a fixed cost per order. For lumpy demand, or when a setup only costs time on a machine with free capacity, the result is too large.
- Treat the result as an upper orientation, not as a target. Lower setup or ordering cost and the economic quantity falls with it: that is the Lean lever.
- Check the result against shelf life, storage space and the minimum quantity of the supplier before you put it into the planning system.