A product needs eleven minutes of work and spends nine days in the plant. Parts travel hundreds of metres between steps, a changeover takes two hours and the compressors run through the weekend. None of this appears as a line in the budget.
Waste Elimination is about seeing these hidden costs, putting a number on them and removing the largest ones first.
What the module covers
- Seeing waste. The eight wastes are explained at the board with real examples. A waste walk on a fixed route runs every two weeks, and every finding gets an estimated annual cost.
- Value stream and inventory. A current state map of the main product family, lead time calculated from counted stock and a future state with dated steps.
- Quick changeover. Changeovers are timed, filmed and split into internal and external work. A standard with preset tools makes the gain repeatable, and the use of the time won is decided up front.
- Transport, material and energy. Routes are measured in metres, scrap is recorded by cause every week and energy per good unit is known for the largest consumers.
- Data, people and governance. System data is searched for slow movers and excess stock. Every improvement has a cost estimate before and a confirmed saving after, and time released by improvement is not used to cut jobs.
The numbers that matter
Lead time and flow efficiency, inventory reach, changeover time, scrap rate, transport distance and energy intensity per good unit.
Where to start
Walk one value stream with a small team, log every waste you see and estimate its annual cost. Pick the top three. If changeover is among them, film one and run a first improvement. In thirty days you have a priced waste list and one visible result.
Common traps
- Waste lists without cost, so nothing gets prioritised.
- Improvement used to reduce headcount, which ends all future ideas.
- Changeover gains that disappear because nobody decided how to use the time.
How it connects
Waste Elimination feeds Continuous Improvement with priorities, shortens lead time for Flow and Just in Time and supports TPM with loss data.
Put it into practice
Start with the free Waste Elimination Quick Start Checklist: 25 statements in five blocks, scored 0 to 4, with your result and three priorities in about 20 minutes. The Starter Kit adds a short guide, a worked example and an Excel tracker for the first 30 days in one area. The Excellence Bundle is the complete module: playbook, two-day workshop, shop floor forms, an Excel system and a ready workshop deck.