Skip to content
Production System | Part 5 of 16

Standard Work: The Current Best Way, Written Down

Standards at the workplace, takt and balance, training, leader confirmation and change control: the base for stable output and improvement.

Three shifts build the same product in three different ways. Output varies, defects appear on one shift and not on the others, and every improvement is lost by the next week. The problem is not the people. It is the missing standard.

Standard Work captures the current best way to do a job: the sequence, the time and the key points. It is the baseline that makes problems visible and improvements stick.

What the module covers

  • The standard at the workplace. A current standard work sheet hangs at the station with takt time, sequence and key points. It matches what the operator really does and shows version, owner and review date.
  • Takt, time and balance. Cycle times are observed element by element. An operator balance chart shows the work content of every operator against takt, with walking and waiting shown separately.
  • Training and qualification. New operators learn with the job instruction method: prepare, present, try out, follow up. A training matrix shows who is qualified on which version.
  • Adherence and leader confirmation. Team leaders confirm one station every shift. Deviations are classified as not followed, not possible or standard wrong, and each type gets a different response.
  • Improvement and change control. Operators can propose changes. A new version is tested, approved and trained before it goes live, and old versions are removed the same day.

The numbers that matter

Adherence rate from leader confirmation, cycle time against takt, share of stations with a current standard, number of qualified people per station and the output and quality spread between shifts.

Where to start

Choose one station with high variation. Observe ten cycles, write the standard with the operators and build a balance chart for the line. Start a daily confirmation by the team leader. After thirty days, the spread between shifts shows whether the standard is working.

Common traps

  • Standards written in an office that nobody can follow at the station.
  • Confirmation as a control exercise instead of a conversation.
  • Video instructions without version control.

How it connects

Standard Work builds on 5S and People and Teamwork. It sets the baseline for Zero Defects, Flow and Just in Time and every improvement in Continuous Improvement.

Put it into practice

Start with the free Standard Work Quick Start Checklist: 25 statements in five blocks, scored 0 to 4, with your result and three priorities in about 20 minutes. The Starter Kit adds a short guide, a worked example and an Excel tracker for the first 30 days in one area. The Excellence Bundle is the complete module: playbook, two-day workshop, shop floor forms, an Excel system and a ready workshop deck.

Newsletter

One Lean idea.
Every week.