The warehouse is full, yet the line stops for a missing part twice a week. Orders take three weeks to get through a process that needs a few hours of real work. Everyone is busy, but the product mostly waits.
Flow and Just in Time turns this around: produce what the customer needs, when it is needed, in the quantity needed, with material that moves instead of waiting.
What the module covers
- Flow and pull. Product families and their value streams are defined. Material moves in one piece or small fixed lots, every buffer has a marked maximum and nothing is produced without a signal.
- Takt and levelling. Takt time comes from customer demand and available time. Work is balanced to takt, and the pacemaker runs a levelled pattern of volume and mix.
- Supermarkets and kanban. Every supermarket part has a fixed location. The number of cards per loop is calculated, recalculated when demand changes and counted every week.
- Material supply and warehouse. Line side material arrives on fixed routes with marked minimum and maximum. Operators do not leave the station to fetch parts.
- Measurement, risk and governance. Lead time, work in process, on-time delivery and inventory reach are tracked every week. Deliberate buffers for supply risk have a written reason and size.
The numbers that matter
Lead time, flow efficiency, work in process, inventory reach in days and on-time delivery. Plan against actual at the pacemaker every hour shows whether the flow is stable.
Where to start
Choose one product family. Count the stock between steps and calculate lead time from it, not from the system. Define the pacemaker and set one kanban loop for a stable, high-runner part. Thirty days later you know your real lead time and have one loop that works.
Common traps
- Cutting inventory before the process is stable. Shortages follow and trust in pull is gone.
- Kanban cards without calculated quantities or weekly card counts.
- Scheduling every process separately instead of only the pacemaker.
How it connects
Flow needs stable equipment from TPM, quality at the source from Zero Defects and short changeovers from Waste Elimination. Intralogistics and Material Flow designs the routes and storage behind it.
Put it into practice
Start with the free Flow and Just in Time Quick Start Checklist: 25 statements in five blocks, scored 0 to 4, with your result and three priorities in about 20 minutes. The Starter Kit adds a short guide, a worked example and an Excel tracker for the first 30 days in one area. The Excellence Bundle is the complete module: playbook, two-day workshop, shop floor forms, an Excel system and a ready workshop deck.