Skip to content
Production System | Part 16 of 16

Intralogistics and Material Flow: Shorter Routes, Fewer Touches

Material flow and layout, storage and slotting, picking and line supply, internal transport and inventory data inside the plant.

A forklift crosses the hall forty times a shift to bring parts that could sit next to the line. Fast movers are stored at the far end of the warehouse, picking errors are found at the customer and the staging area is always full.

Intralogistics and Material Flow designs how material moves inside the plant: where it is stored, how it is picked, how it reaches the line and how people and vehicles share the routes safely.

What the module covers

  • Material flow and layout. A from-to matrix built from real movements, the main flows drawn on the layout, marked zones for receiving, storage, picking, staging and shipping, and one direction of flow.
  • Storage and slotting. Every location has a readable label that matches the system. Fast movers sit closest to the pick and dispatch point, utilisation is measured monthly and slotting is reviewed every quarter.
  • Picking and line supply. The picking method fits each order type, picks are confirmed at the location and each part group has a fixed supply concept: kanban, kitting or sequence.
  • Internal transport and safety. Every recurring transport task has a defined means and route, fleet size is calculated, walkways and vehicle routes are separated and speed limits are checked.
  • Data and inventory. Inventory accuracy is measured by cycle counting, master data has owners and system stock matches the shelf.

The numbers that matter

Picks per hour, picking error rate, inventory accuracy, transport distance per part, utilisation per storage zone and line stops caused by missing material.

Where to start

Record two weeks of material movements and build a from-to matrix. Draw the three largest flows on the layout and move the twenty fastest movers closer to the pick point. Start measuring picks and errors every week. Thirty days later you will see fewer kilometres and fewer errors.

Common traps

  • Automating storage before the flow and slotting are right.
  • Counting stock to correct numbers instead of learning why they were wrong.
  • Mixed routes for people and vehicles without clear marking. Safety rules for vehicles and driverless systems differ by market, so check what applies with your safety specialist.

How it connects

Intralogistics delivers the routes, storage and supply behind Flow and Just in Time, supports Launch Management with ready supply chains and removes transport waste identified in Waste Elimination.

Put it into practice

Start with the free Intralogistics and Material Flow Quick Start Checklist: 25 statements in five blocks, scored 0 to 4, with your result and three priorities in about 20 minutes. The Starter Kit adds a short guide, a worked example and an Excel tracker for the first 30 days in one area. The Excellence Bundle is the complete module: playbook, two-day workshop, shop floor forms, an Excel system and a ready workshop deck.

Newsletter

One Lean idea.
Every week.