Skip to content
Production System | Part 15 of 16

Problem Solving: Fix It Once, at the Cause

Problem definition, containment, root cause analysis, countermeasures that reach the standard and escalation levels from the line to the plant.

The same fault appears for the fourth time this quarter. Each time it is fixed quickly, the line runs again and the report says solved. The cause was never found, so the problem keeps coming back.

Problem Solving gives every team a shared method and clear levels: quick response at the line, structured analysis when a problem repeats and the full eight-step approach for customer and serious issues.

What the module covers

  • Problem definition and visibility. Every problem is recorded in one log as a gap between standard and actual. The person leading it has been to the place where it happened, and open problems are visible with their age.
  • Containment and quick response. Anything that can reach the next process or the customer is contained first. Quick fixes are written down, and a fix that repeats three times moves to a structured analysis.
  • Root cause analysis. 5 Why chains are checked backwards with “therefore”. Complex problems use cause and effect diagrams and is / is not analysis, and the root cause is confirmed by switching the effect on and off.
  • Countermeasures, check and standard. Every countermeasure is linked to a verified cause, checked with data after an agreed time and written into the standard. Retraining alone is never accepted.
  • Capability, coaching and escalation. Written escalation rules, leaders who coach at the workplace with open questions and a skills matrix that shows who can lead each level.

The numbers that matter

Recurrence rate of closed problems, age of open problems, time to containment, share of problems with a verified root cause and the number of qualified problem solvers per team.

Where to start

Set up one problem log for one area and define three levels: quick fix, 5 Why, eight steps. Take the most frequent repeating problem and work it properly with a coach. After thirty days, check whether it has come back.

Common traps

  • Root causes that blame people instead of conditions.
  • Countermeasures without an effectiveness check.
  • Structured methods used for everything, so small problems wait for weeks.

How it connects

Problem Solving is the engine behind Zero Defects, TPM and Visual and Shop Floor Management. Its results flow into Standard Work and Continuous Improvement.

Put it into practice

Start with the free Problem Solving Quick Start Checklist: 25 statements in five blocks, scored 0 to 4, with your result and three priorities in about 20 minutes. The Starter Kit adds a short guide, a worked example and an Excel tracker for the first 30 days in one area. The Excellence Bundle is the complete module: playbook, two-day workshop, shop floor forms, an Excel system and a ready workshop deck.

Newsletter

One Lean idea.
Every week.