Skip to content
Series | 6 parts

Work Instructions

Work instructions that are used at the station. 6 parts in three blocks, from the choice of tasks and the layout of a visual instruction to writing with operators, variants and setup instructions, document control, training and the effectiveness check.

Most plants have work instructions. Few have instructions that operators read. The documents are long, old and written for the auditor, copies of three versions hang at the stations, and nobody can say whether the key points are followed. This series follows one worked example, the assembly and test area of a plant for pneumatic cylinders with 60 tasks, 38 old documents and 46 printed copies, through the whole sequence: which task needs an instruction at all, how a visual instruction is built from step, key point, reason and picture, how it is written with operators and tried out at the station, how variants and setup tasks are handled, how version, approval, distribution and withdrawal keep one valid version in use, and how training and an effectiveness check show whether the sheet works. The focus is the document itself, how it is created and how it is controlled.

6 parts

Newsletter

One Lean idea.
Every two weeks.