Skip to content
Workforce Planning and Shift Scheduling | Part 7 of 8

The Daily Staffing Round and the Escalation

Ten minutes at a board before the shift starts: who is here, which posts are open, who decides what, and how short-notice absence is handled without drama.

A roster published three weeks ahead still meets reality every morning. Somebody is absent, somebody is in training, a peak day needs an extra post. The question is whether that is decided in ten minutes at a board or during the shift, one phone call at a time.

The round

In area A2 the round starts at 06:45, takes ten minutes and happens at the staffing board in the area, not in an office. The shift leader runs it, the area manager attends, the two floaters are there, and the planner joins twice a week.

On the board: posts planned, people present, absences, floater assignment, qualification check, open points and the figure of yesterday. The output is that every post has a name, or an escalation has an owner and a time.

The qualification check is the part most often skipped and most often needed. Before a floater is put on a station, the board says whether that person holds the minimum level. A floater on a station they are not qualified for is a quality problem with a two-day delay.

Escalation when posts stay open

The value of an escalation rule is that nobody invents a decision under time pressure. Four levels are enough:

Posts open Who Within Decision
1 Shift leader At the round The first floater takes the post, the second stays free
2 Shift leader At the round Both floaters take posts, the line rate is reduced by the planned amount
3 Area manager 30 minutes Hold one station and run from the buffer, move the program, or call hours from the account
4 or more Production manager Same morning Decide the program of the day with planning and logistics, and inform the customer side

Two things make this work. The reduced line rate at level 2 is agreed in advance, so the shift does not run a full plan with two people missing and discover the shortfall at 14:00. The station held at level 3 is chosen in advance too: in A2 a pre-assembly station with a buffer behind it, never the test station at the end.

Short-notice absence without drama

Four rules keep the morning calm:

  • One channel. Absence is reported to one number or one person, before an agreed time, and lands on the board. Nobody is called down a list at 06:00.
  • The floater is already rostered. Because the position exists in the plan, the cover is an assignment, not a search.
  • A reason code, not a diagnosis. The area plans with rates. What is recorded is the category, nothing more, and how it is recorded is agreed with human resources before the process is published.
  • A monthly review. Absence by shift, by crew and by weekday shows where the work or the pattern is the problem, which is information a single case never gives.

What the round is not

It is not a daily production meeting, and it is not the place to solve the quality problem of station S6. Ten minutes, staffing only, every post named or escalated. Anything that needs longer leaves the round as an open point with an owner.

It is also not a substitute for the plan. A round that regularly ends at escalation level three says something about the roster, the allowance or the qualification coverage, not about the morning. Count the escalations, review them next to the staffing level, and fix the plan rather than the day.

The figure it produces

Every round produces one number: posts covered divided by posts planned. Over a month it becomes the staffing level, the first of the six key figures of this series and the only one that comes from the shop floor rather than from a system.

Newsletter

One Lean idea.
Every two weeks.