Skip to content
Production

Changeover Time

Changeover Time (SMED)

The time from the last good part of one product to the first good part of the next, at full speed and quality.

Formula

Changeover time = Time of first good part (new) - Time of last good part (old)

Worked examples

  1. 01Press changeover measured from last good part to first good part: 48 minutes, of which 31 minutes internal and 17 minutes of waiting for the die cart. After moving preparation outside: 24 minutes, a reduction of 50%.
  2. 02Injection molding: 6 changeovers per day at 35 minutes = 210 minutes, 15.6% of 1,350 available minutes. Halving the time gains 105 minutes per day.
  3. 03Lot size effect: two changeovers of 40 minutes per day cost 80 minutes. Halving the lot size means four changeovers and 160 minutes. With a changeover time of 20 minutes, four changeovers again cost 80 minutes: half the lot size at the same capacity.

Pitfalls

  • Stopping the clock at the first part instead of the first good part hides the adjustment loss.
  • Averages hide the long changeovers; track the distribution.

Related KPIs

Newsletter

One Lean idea.
Every two weeks.